AREAPLAN QUADRA RESPONDS TO THE CONSTANTLY DEVELOPING DAILY NEEDS OF THE WORKING WORLD. THEY ARE MODULAR DIVIDING WALLS, MADE FROM PRE-ASSEMBLED SINGLE BLOCKS CONNECTED TO THE COMPLETING ELEMENTS. THE REDUCED NUMBER OF COMPONENTS AND THEIR MODULAR NATURE GET THE BEST USE FROM THE PARTS AND MAKE ASSEMBLY SIMPLE. THEY ARE EASILY AND VERY QUICKLY INSTALLED BY FIXING THEM TO THE FLOOR AND CEILING WITH A COUNTERTHRUST SPRING SYSTEM THAT GUARANTEES PERFECT STABILITY FOR THE WALL. THE WALL MODULES FULLY CONFORM TO CURRENT HEATING-ACOUSTIC REQUISITES AND CAN BE WIRED WITH INSPECTION FLAPS IF REQUIRED.

ALTHOUGH THE PARTS ARE VERY SIMPLE AND RATIONAL, QUADRA WALLS ARE THE RESULT OF VERY PRECISE DESIGN AND OFFER ALL THE PRACTICALITY AND ATTRACTIVE APPEARANCE FOR MODERN MANAGEMENT OFFICES.

THE BUFFER WALLS CAN BE BLIND, GLAZED OR MIXED, WITH BLIND OR GLASS HINGED DOORS. THESE ELEMENTS CAN HELP CREATE AN ENDLESS VARIETY OF COMPOSITIONS, WHICH IS INCREASED FURTHER THANKS TO ALL THE DIFFERENT MELAMINE FINISHES OFFERED BY THE FREZZA CONNEXION SYSTEM.

TECHNICAL CHART ALL THE STRUCTURAL PARTS IN THE WALLS ARE METAL. THE EXTERNAL PANELS ARE 18 MM THICK PARTICLEBOARD FOILED IN THE COLOURS: “MEGT” ICE GREY, “MEMO” MAGNOLIA, “MFFA” BEECH, “MKBI” WHITE, “MFWE” WENGÈ, “MFRO” OAK, “MFFR” LIGHT ASH, “MFNN” WALNUT AND “MFNT” BIER WALNUT, OR WITH TEMPERED GLASS WITH AN EXTRUDED ALUMINIUM FRAME. THE MODULE WIDTHS ARE 60 – 100 – 120 CM FOR BLIND PANELS, 100 AND 120 CM FOR DOUBLE GLAZED FRAMES, 100 CM FOR FRAMES WITH SINGLE GLASS. ELEMENTS IN THE “BLOCK” STRUCTURE A FEATURE OF QUADRA DIVIDING WALLS IS THAT THEY ARE PRE-ASSEMBLED ACCORDING TO THE MODULES GIVEN IN THE CATALOGUE. THESE SO-CALLED “BLOCKS” ARE FORMED OF A BLIND OR GLAZED BUFFER PANELS, OR MIXED PANELS, THAT A METAL STRUCTURE IS SCREWED TO FORM OF A PAIR OF 8/10 THICK COLD GALVANISED SHAPED PLATE UPRIGHTS AND BOTTOM AND TOP CROSSPIECES MADE FROM 6/10 THICK COLD GALVANISED RESSED PLATE. THE CROSSPIECES ARE JOINED TO THE UPRIGHTS BY A SET OF ANGLE IRONS MADE FROM 2 MM SHAPED PLATE. THE BOTTOM ANGLE IRONS ARE PREPARED FOR HOLDING THE LEVELLING FEET, FORMED OF AN M10 THREADED PIN AND A METAL PLATE SUPPORT BASE, WITH HEIGHT REGULATION BETWEEN +/- 20 MM. THE TOP ANGLE IRONS ARE PREPARED FOR HOLDING THE COUNTERTHRUST SPRING, WHICH CAN BE LOADED UP TO 43 KG. THE BLOCKS ARE HOUSED IN TRACKS ON THE FLOOR AND CEILING MADE FROM A 0.6 MM THICK COLD ROLLED PLATE PROFILE IN THE FINISH LIGHT GREY RAL 7035. THEY ARE COMPLETED WITH A SOFT SEAL THAT FITS BETWEEN THE TRACK AND THE FLOOR AND CEILING, TO DAMPEN THE SOUND WAVES. THE MODULES ARE JOINED TO EACH OTHER WITH TONGUE AND GROOVE JOINTS, AND MADE FIRM BY A SERIES OF GALVANISED STEEL SELF-THREADING SCREWS. THE BLOCK IS COMPLETED BY A BUFFER PANEL HOOKED TO THE STRUCTURE BY A SERIES OF PRESSED GALVANISED STEEL HOOKS. BUFFER ELEMENTS THE COVERING ELEMENTS ARE IN 18 MM THICK PARTICLEBOARD, FIRE CLASS 2, DENSITY 620/650 KG/M³, FOILED ON BOTH SIDES IN DECORATIVE PAPER IMPREGNATED WITH MELAMINE RESINS, WEIGHT 120 G/M² IN THE PROVIDED FINISHES. THE HORIZONTAL SIDES HAVE A 0.45 MM THICK PLASTIC BORDER AND THE VERTICAL SIDES HAVE A 1 MM THICK PLASTIC BORDER WITH A SOFT CENTRAL PROFILE. THE GLASS PANELS HAVE AN EXTRUDED ALUMINIUM FRAME EPOXY NON-TOXIC POWDER COATED IN THE FINISH “AS” SILKY ALUMINIUM. THERE ARE TWO VERSIONS OF GLASS PANELS. THE FIRST HAS 5 MM THICK SINGLE TEMPERED GLASS IN CONFORMITY WITH UNI EN 12150 STANDARD, AND THE SECOND HAS DOUBLE TEMPERED GLASS IN CONFORMITY WITH UNI EN 12150 STANDARD, 4 OR 5 MM THICK DEPENDING ON THE PANEL SIZE. BOTH VERSIONS HAVE A SOFT CO-EXTRUDED PVC SEAL PLACED BETWEEN THE GLASS AND FRAME. THE PASSAGE DOOR JAMBS ARE MADE FROM AN EXTRUDED ALUMINIUM PROFILE COATED WITH EPOXY NON-TOXIC POWDERS IN THE FINISH “AS” SILKY ALUMINIUM, WITH A SOFT PVC SEAL WHICH ACTS AS RABBET AND DUST PROTECTION. THE JAMBS ARE FIXED TO THE BEARING STRUCTURE BY A SET OF SELF- THREADING SCREWS. THE BLIND HINGED DOORS HAVE A SOLID WOOD FRAME COVERED ON BOTH SIDES WITH A PARTICLEBOARD PANEL, FOILED WITH MELAMINE RESINS IN THE PROVIDED FINISHES, AND A 2 MM THICK BORDER AROUND THE EDGES. SPECIAL ALUMINIUM HINGES ARE USED TO HOOK THEM TO THE STRUCTURE AND KINEMATICAL MECHANISMS. THE HINGED GLASS DOORS ARE MADE FROM 10 MM THICK TEMPERED GLASS CONFORMING O UNI EN 12150 STANDARDS, WITH TRANSPARENT, ETCHED OR SCREEN PRINTED GLASS. SPECIAL ALUMINIUM HINGES HOOK THE DOOR TO THE STRUCTURE AND KINEMATICAL MECHANISMS. HANDLES HOPPE HANDLES ON STANDARD BLIND DOORS – ALUMINIUM FINISH. DOUBLE-CYLINDER LOCKS. OPTIONAL NOS HANDLES ON BLIND DOORS – FINISH: 45 quadra. BLACK GRIP AND ALUMINIUM STOCK. DOUBLE-CYLINDER LOCKS. HOPPE HANDLES ON STANDARD GLASS DOORS – ALUMINIUM FINISH. DOUBLE-CYLINDER LOCK. OPTIONAL NOS HANDLES FOR GLASS DOORS – FINISH: BLACK GRIP AND ALUMINIUM STOCK. DOUBLE- CYLINDER LOCKS. CONNECTING SYSTEMS SUITABLE SYSTEMS OF BRACKETS AND METAL PARTS TO CREATE 2, 3 AND 4-WAY 90° NODES, WITH A PAIR OF EXTRUDED ALUMINIUM PROFILES POWDER PAINTED IN “AS” SILKY ALUMINIUM, TO CREATE 2-WAY CONNECTIONS WITH A VARYING ANGLE BETWEEN 90° AND 180°. TECHNICAL PLANT THE WIRING SYSTEM DEVELOPS ALONG HORIZONTAL ROUTES INSIDE THE BOTTOM TRACK AND THE HOLES IN THE UPRIGHTS; THE VERTICAL ROUTES EXTEND THROUGH THE SPECIAL PASSAGES IN THE CROSSPIECES AND INSIDE THE BLIND SERVICE MODULES. SWITCHES, SOCKETS, ETC. CAN BE FITTED ANYWHERE ON THE BLIND PANELS.


Designer: Sergio Lion