Recessed wall/ceiling luminaires

Crystal glass with light-diffusing texture, inside white
Die-cast aluminium luminaire housing
Frame ring optionally
• stainless steel
• die-cast aluminium with white enamel RAL 9010
with 2 cable entries for through-wiring
8111 · 7959 1 cable entry
The luminaires for fluorescent lamps are fitted with the required ballasts.
When preparing the recessed opening, it may be practical to use an installation housing. Aluminium installation housings with 2 cable entries are given in the table.
If luminaires are installed in brickwork or concrete walls and ceilings which are then plastered, it is also appropriate to use the fixing frames listed in the table.
Installation housings and fixing frames are accessories and must be ordered separately.
Protection class IP 65

• low voltage halogen lamps QT 9-tr · 12 V · without transformer
• incandescent lamps D 45 - E 14 and A 60 - E 27
• fluorescent lamps TC-T · low-loss ballast
• fluorescent lamps TC-TELI · electronic ballast

Stainless Steel
8111: 1 QT 9-tr, 10 W, Lumen 130; A=80, B=90, C=71 mm
8113: 1 D 45, 40 W, Lumen 400; A=190, B=110, C=175 mm
8164: 1 A 60, 60 W, Lumen 710; A=250, B=110, C=227 mm
8311: 1 A 60, 100 W, Lumen 1360; A=300, B=115, C=280 mm
8115: 1 TC-T, 13 W, Lumen 900; A=190, B=110, C=175 mm
8165: 1 TC-T, 26 W, Lumen 1800; A=250, B=110, C=227 mm
8312: 1 TC-TELI, 26 · 32 W, Lumen 2400; A=300, B=115, C=280 mm
Dimensions installation housing on request

White
7959: 1 QT 9-tr, 10 W, Lumen 130; A=80, B=90, C=71 mm
7961: 1 D 45, 40 W, Lumen 400; A=190, B=110, C=175 mm
8162: 1 A 60, 60 W, Lumen 710; A=250, B=110, C=227 mm
8309: 1 A 60, 100 W, Lumen 1360; A=300, B=115, C=280 mm
7963: 1 TC-T, 13 W, Lumen 900; A=190, B=110, C=175 mm
8163: 1 TC-T, 26 W, Lumen 1800; A=250, B=110, C=227 mm
8310: 1 TC-TELI, 26 · 32 W, Lumen 2400; A=300, B=115, C=280 mm
Dimensions installation housing on request