Technical information:

- the best wood species suitable for outdoors
- easy maintenance
- easy installation
- entirely made in italy
- high-quality product
- thermally stabilized
- long term stability
- no formaldehyde
- no health risk emissions
- 80 years of experience


Characteristics:

Solid wood for outdoors:
- 4 round corners
- 1 smooth side
- 1 antislip side
- 2 grooves for stainless steel plates


Dimensions:
thickness: 22 mm - 26 mm (Thermowood)
widths: 90/100 -120/150 mm - 120/150 (Thermowood)
lengths: 600-3000 mm - > 3000 mm (Thermowood)
gap between boards: 3,0 mm
finish: unfinished


Wood species:
- iroko africa
- ipe brasil
- teak asia
- thermowood europe

Ageing:
A regular maintenance keeps pretty unaltered the colour and the brightness of our exterior solid wood Xilo1934. But you cannot deny the charm of a material that the time and weather have changed for eternity.


Layout:
The boards can be fixed to the backing profiles using on sight stainless steel screws or fixing steel plates. Fixing steel plates make it possible to place the boards closer to one another and, thanks to their particular shape, they can be slightly detached from the backing profile, thus enhancing wood perspiration. The boards are placed on supporting backing profiles fixed to the ground or not, which have to be placed at a distance to be checked during laying, but usually every 30-35 cm at least.


Maintenance:

After the laying:
Since exterior floors do not receive any treatment they need one or two coats of protection oil to be applied soon after the laying.

Weekly and daily cleaning:
Ordinary cleaning is done in order to remove dirt or any other waste as it is necessary.

Maintenance:
Usual maintenance does not require any particular treatment, except a coat of oil, when the previous one is dried by sunlight.

Suggestions:
N.b.: for the maintenance operations see anyway the instructions which accompany the products used.


Specifications:
Solid wood floor for outdoors in Teak or Ipè or Iroko or Thermowood, which is dried and processed in Italy, with exposure to temperatures exceeding 60° to increase the stability of the material long-term. Thickness 22/26 mm, widths 90/100 mm or 120/150 mm and lengths from 600 mm to 3000 mm or higher. Solid wood manufacturing with 4 round corners, 1 smooth surface, 1 antislip surface and 2 grooves for stainless steel fixing plates, gap between boards of 3 mm. Product suitable to be installed on wooden backing profiles by stainless steel fixing plates or on sight screws.